Folding stainless steel aluminum coated safety Type-120

Product Info.

Description
The Τ120 INOX type is a new product that is an upgrade of the T100 type, as our suggestion for those cases where retractable security gates have to be installed in coastal areas, with high levels of humidity. In this way we avoid having to do maintenance to the crossed “scissors” while the cost of maintenance is zero. At the same time, it has an elegant and modern design, combining its stainless steel elements, with the appropriate colouring of the overall structure. The minimum width for its installation in the wall is at a perimeter of 60mm in circumference.
Τechnical Characteristics
1.Swivel Bars 4mm to the uprights
2.Stainless steel security lock with key 2-point type safe
3.Removable lower drivers 51x42mm
4.INOX Scissors 16x6mm
5.Hinges for rotation 180°
6.Upper Driver 51x42mm
7.Reinforced aluminum profile
8.Teflon Rollers with steel ball bearings
9.Full color range in coating RAL paints, special SABLE colors, anodizing and Decoral wood imitation hues
Operating Instructions
Locking:
1. Bring the “body” of folding uprights in a position it gets the channel on the driver.
2. Release the latch support uprights and pull the 1st post so as to open the folding and then place your palm behind the strut bearing on the security lock.
3. Push the door smoothly to the point locks, ensuring that it’s moving uniformly along the drivers rolling.
4. Push the upright to lock the pins incorporated within the strut.
5. Holding with your hand’s palm the back side of the upright as resistance, lock with key loaded into the lock.
Unlocking:
1. Unlock with the key by placing it in the hole in the strut bearing the lock so that the notches located at the base of the key are turned to the side that locks the product.
2. Pull the system by placing your palm on the inside point of the post bearing the lock and push the fold in the direction of the hinges.
3. Secure the uprights with special latch.
4. Lift the scrolling driver and lock it in the “body” of the uprights.
5. Fold the safety towards the wall.
Maintenance Guidelines
Folding VIOMETALOUMIN products need to be cleaned regularly and moving parts must be lubricated with oil spray twice per year.
To clean them, use:
1. Brush with soft bristles which will clean the surface dust.
2. Soak a cloth into a mild soap and water solution and use it to wash all surfaces thoroughly removing dirt, air pollutants and particles that have been attached to metal surfaces. The process should be repeated 2-3 times a year.
3. Lubricate two times a year the rolling wheels, lock and all moving parts of the frame.
4. In coastal areas systems require frequent cleaning and lubrication 5-6 times a year.

VIOMETALOUMIN Systems analytically.

Certifications

Viometaloumin Certifications

Viometaloumin Certifications

Viometaloumin Certifications

Why VIOMETALOUMIN?

  • Because our Systems are Unique and Patented.
  • Because we offer 3 Years Guarantee.
  • Because we offer the highest value at the lowest cost.
  • Because Installations of our Systems are being done by Experienced Technicians.
  • Because we offer constant After Sales Technical Support and Customer Service.